5400 is a super machine that combines LCR meter with the Impedance Analyzer. The LCR meter is 3 to 5 times faster than the 3260, and it could measure up to 10 MHz. These measurements and analyzations are all done with the 5400.

Completely characterize components graphically.

The binning function allows component manufacturers to sort components in up to ten bins. Sorting is carried out either by absolute values or by percentage of values.

Component tests with up to 300 A DC bias current for operation of up to 500KHZ

Component tests up to 50A DC bias for operation of up to 3MHz

Fast automatic multi-frequency production testing of capacitors and inductors

Protection against charged capacitors

• Wide frequency range of 20 Hz to 10MHz
• 0.1% basic accuracy
• Internal ±100mA bias current
• Up to 300A DC bias current
• Bin Handler Mode (option) sort components in up to 10 bins
• Analysis mode - graph measured parameters against Frequency, AC Drive Level & DC Bias Current
• Z, L, C, Rac, Ø, Q, D, Rdc
• Straightforward intuitive operation
• Print test results
• IEEE 488 GPIB control
• Precise high frequency impedance measurements
• Characterize components from 20 to 10 MHz
• Comprehensive measurement functions
• 0 to +40V DC bias voltage and 0 to 100mA DC bias Current (Option)
• ±40V DC bias voltage (Option)
• Touch screen operation with keyboard and mouse options
• Clear graphic displays aids measurements
• Intuitive user interface
• Fully programmable over GPIB
• Keyboard and mouse optional control

Measurement Function	Capacitance (C) Inductance (L) Resistance (R) Reactance (X) Conductance (G) Susceptance (B) Dissipation Factor (D) Quality Factor (Q) Impedance (Z) Admittance (Y) Phase Angle (Ø)
Frequency Range	20 Hz to 10MHz Option>
AC Drive Level	10 mV or 1V rms (varies with frequency) 200 µA to 20 mA rms (varies with frequency)
Measurement Speeds	4 speeds selectable Up to 150 measurements per second for test frequencies ≧100 Hz
Accuracy	Dissipation factor - ±0.0005 (1+D2) Quality factor - ±0.05 %( Q+1/Q) Capacitance / Inductance / Impedance - ±0.05% Accuracy varies with frequency, drive level and measured impedance
DC Bias Current (Option)	Internal DC Bias ±100 mA current; ±10V DC Voltage External DC Bias Current 300A; ±60V DC Voltage
Binning (Option)	10 bins with absolute and percentage limits 25 way d-type interface connector /B1 (Non-isolated) Comon 0V Bin outputs 0 to 5V(normal) with >10mA current sink capability /B2 (isolated) Comon 24V input outputs 0 to 24V with >10mA current source capability
Input Specification	Power supply - Input voltage 90 V AC to 264 V AC (Autoranging) Mains frequency 47 to 63 Hz
Display	8.4" VGA (650 x 480) color TFT with touch panel
Measurement Connections	Four front panel BNC connectors permit two, three or four terminal connections with the screens at ground potential. 1J1054 Component Fixture (supplied as standard) allows connection to leaded components and devices. 1J1012 (2 Terminal) and 1J1014 (4 Terminal) fixtures allow connection to surface mount devices.
Printer	HP-PCL compatible graphics printing (local and network) Centronics / parallel printer port, Epson compatible text/ticket printing (local)
Remote Trigger	Rear panel BNC with internal pull-up, operates on logic low or contact closure
GPIB Interface	External instrument control 24 pin IEEE 488 connector
USB Interface	Two Unversal Serial Bus (USB) interfaces USB 1.1 compliant
VGA Interface	15-way D-type connector to drive an external monitor in addition to the internal screen
Network Interface	10/100-BASETX Ethernet controller RJ45 connector
Keyboard Interface	Standard USB or PS/2 keyboard port. Instrument front panel remains active with keyboard plugged in
Mouse Interface	Standard USB or PS/2 mouse port Touch screen remains enabled when the mouse is connected

------

------